Valentine 1 Connection LE Bluetooth enabled module for devices iOS and android

Description

V1connection is a Bluetooth
enabled module that wirelessly connects V1 to your compatible iPhone and Android devices.
V1connection LE is also the Master Controller for your V1 system, allowing you to revise programming, adjust SAVVY settings, change muting, activate dark mode, save custom programming profiles for different trips, and more, all from your Android device.
Audible warnings from your Valentine One can be transmitted through your phone.
V1connection works with all V1s but its full capability is available only from V1s with ESP. (Check for the ESP logo on the front panel below the Control Knob.) On pre-ESP V1s, your hand-held will serve as a wireless remote display of all of V1's front-panel warnings, but other functions and screens are unavailable. The free
V1connection, the app
need to be downloaded from the App Store or Play Store.
Compatibility-requirements:
V1connection LE is compatible with all iPhone, iPad and iPod touch devices using Apple IOS version 8.0 or higher.
. Newer Android devices with Bluetooth LE (low energy).
If your Android device supports Bluetooth LE (Low Energy), we recommend using V1connection LE instead of V1connection. Follow the steps below to verify compatibility with V1connection LE.
You can choose between three information screens at any time:
1.
reproduces V1 front-panel warnings in real time
2.
shows the continuously-updated Threat Picture featuring our new Arrow-in-the-Box concept, a revolutionary way of analyzing radar threats
3.
shows a list of all threats within range, with direction and frequency for each, arranged by length of tracking time.
Includes:
3.5-inch power cord, beaded tie strap, self-stick wire clip and instructions.
Installation:
using the short, 3.5-inch power cord, connect the RJ11 jack of the module to the ACC jack of V1'S power adapter. Then download the free app called  V1connectio, the app, from the App store on your device